Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product
Page 4-21
Save
Press the “Save” key to save the left monitor image on the system disk.
After you have completed the exposure, press the “Save” key to save the last image displayed on the left
monitor to the Workstation hard-drive.
Swap
Press the “Swap” key to exchange images between the left and right monitors. Swap will copy the image to
the right monitor in the following cases: 1) only one image on the left monitor and there’s no image on the
right monitor, 2) you are taking exposure.
Blank
Press the “Blank” key to blank the screen quickly if the screens are displaying information which cannot be
seen by someone else. Press any key on the membrane keyboard to re-display the screens’ images.
Navigation and Text-Entry
Workstation navigation keys, text entry and text modification keys allow you to move the cursor and edit
text.
Navigation Keys
Tab
Move the cursor to the next text-entry field.
Home
Page up
Page down
End
Text Entry Keys
The text-entry keys allow you to enter and edit text.
To Next Page
Loading...
