GE E1050TW - Flash Mode

30 3130 31
2. Touch the button to select the Picture Quality
option.
3. Select a setting from the 3 options:
• Picture quality: Best
• Picture quality: Fine
• Picture quality: Normal
4. Touch the button to conrm.
5. Number of remaining shots will be shown on the
screen.
Flash mode
Touch the button on the screen to enter the Setup
menu and switch between 6 ash modes:
•
Auto ash
The camera will automatically control the
ash based on lighting conditions.
•
Red-eye reduction
The camera will pre-ash to reduce
Red-eye.