36 37
The ISO function allows you to set the camera sensor
sensitivity to light. To improve the performance in
darker environments, a higher ISO value is required.
On the other hand, a lower ISO value is needed when
in bright conditions. (The ISO setting is only available
when the camera is in the Manual mode).
To set the ISO value:
1. In manual shooting mode, touch the button at
the bottom right of the screen and then page down.
The ISO button will appear on this page.
ISO
2. Press the icon to enter the ISO setup menu.
3. Select an ISO level on the screen, Auto, 80, 100,
200
, 400, 800, and 1600.
4. Touch the button to conrm the ISO setting.
Pictures taken with higher ISO levels will contain
more noise than lower ISO levels.
To Next Page
Loading...
