EasyManua.ls Logo

GE E1050TW - B Shutter (Slow Shutter); Blink Detection

GE E1050TW
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
54 55
54 55
B shutter (slow shutter)
When the Slow Shutter is active, the shutter will stay
open for the pre-set exposure time when you keep the
shutter button depressed.
(The Slow Shutter is only available under the Manual
mode ).
• To set the exposure time: Touch the button
to adjust the exposure time. Press and hold the
button for 2 seconds to automatically increases /
decreases the exposure time to the limit between 2
to 30 seconds.
The B Shutter (Slow Shutter) will be turned o when
the value is set to zero. You need to reset the value
for every shot. The default value of the camera is 0
seconds.
The use of tripod is recommended on a long-term
exposure.
Blink detection
When Blink Detection is active, a warning message
appears on the screen when the camera detects that a
person's eyes are closed.
On
: Blue.
Off
: Grey.
When the Blink Detection is active, the icon
will be shown on the screen.

Table of Contents

Other manuals for GE E1050TW

Related product manuals