GE Monogram ZDP486ND User Manual

– 71 –
Diagnostics and Service Information
Factory Test Mode
The Factory Test mode can be accessed within the fi rst 2 minutes of power up, before any other selections
are made. Press and hold the PUSH TO SELECT knob for approximately 3 seconds within the fi rst 2 minutes.
The display will show “Prod”. The options for Factory Test are cycled through by pressing the TIMER button.
(See table next page.)
Note: To exit the Factory Test mode, hold the PUSH TO SELECT knob for 3 seconds.
(Continued Next Page)

GE Monogram ZDP486ND Specifications

General

Brand	GE
Model	Monogram ZDP486ND
Category	Ranges
Language	English