loginCfg
3-12 PACSystems* RX3i PROFINET Controller Command Line Interface Manual – July 2011 GFK-2572
loginCfg
Non-Global Command
This command changes the Modify Access level login password.
Passwords are case-sensitive. The following characters are allowed for passwords: Any
alphanumeric character and in addition:
` ~ @ ^ & * _ - + = { } [ ] \ / ; : < , (comma) . (period)
Passwords must be between 4 and 10 characters.
loginCfg password prompts to set new Modify access level.
loginCfg default returns the Modify access level password to its default value.
loginCfg Command Format
loginCfg [default | password]
loginCfg password Parameters
Specifies the current password that will be replaced with the
newPassword. If the oldPassword value does not equal the current
password, the command returns an error.logincfg
Specifies the new password to replace the current password.
Examples
Returning the Modify Access Level Password to its Default Value
device-name= loginCfg default
login password changed to default
device-name=
Changing the Modify Access Level Password
device-name= loginCfg password
Enter the existing Password : system
Enter the new Password : ge123
Confirm the new password : ge123
Modify level login password changed
device-name=
To Next Page
Loading...
