GE PACSystems RX3i Command Line Interface Manual

`
show debug fatalInfo
GFK-2572 Chapter 2 Monitor Level Commands 2-27
2
show debug fatalInfo
Global Command
This command displays saved fatal error debug data stored in non-volatile storage. When a
fatal error occurs, the controller halts normal processing, captures this data, and displays a
failure mode indication by blinking a sequence on its faceplate LEDs. This information may
provide useful data for diagnosing the problem with customer support.
show debug fatalInfo Command Format
show debug fatalInfo

GE PACSystems RX3i Specifications

General

Brand	GE
Model	PACSystems RX3i
Category	Controller
Language	English