GE PACSystems RX3i Command Line Interface Manual

`
terminate
GFK-2572 Chapter 2 Monitor Level Commands 2-75
2
terminate
Global Command
This command ends the Command Line Interface session. When the session ends, terminal
session parameters (for example, terminal row/column settings) are not saved.
Note: In HyperTerminal, the session does not close after executing the terminate command.
To re-establish the connection it may be necessary to disconnect and reconnect the
HyperTerminal application and press the Enter key.
terminate Command Format
terminate
Example
Screen Display
device-name> terminate
01-JAN-2000 05:44:17.0000
Command Shell Session Terminated

GE PACSystems RX3i Specifications

General

Brand	GE
Model	PACSystems RX3i
Category	Controller
Language	English