GE PACSystems RX3i Command Line Interface Manual

show mem
2-38 PACSystems* RX3iPROFINET Controller Command Line Interface Manual – July 2011 GFK-2572
2
show mem
Global Command
This command displays System Memory status for various memory pools. show mem shows
status and counters for all memory pools. The following parameters request status for a specific
memory pool:
1. heaps – shows various memory heaps. The number and name of memory heaps are
PNC/PNS product dependent and are not described in detail in this document.
2. netData – shows status for the network data memory pool which provides the stack with the
memory it needs for packet-oriented data received from or transmitted over the Internet.
3. netSys – shows status for the network system memory pool which provides the network
communications stack with the memory it needs for its internal structures and data types.
show mem Command Format
show mem [heaps | netData | netSys]
Examples
Displaying Status and Counters for all Memory Pools
Screen Display
device-name> show mem
01-JAN-2000 05:44:17.0000
<<< OSVol Status >>>
Free Bytes in Partition : 7843016
Free Blocks in Partition : 24
Maximum free block size : 7841296
Allocated Bytes in Partition : 8624368
Allocated Blocks in Partition : 1107
Max Heap Usage: 3942056
<<< usrRoVol Status >>>
Free Bytes in Partition : 7843016
Free Blocks in Partition : 24
Maximum free block size : 7841296
Allocated Bytes in Partition : 8624368
Allocated Blocks in Partition : 1107
Max Heap Usage: 3942056
Additional output not shown here. See examples on the following pages.

GE PACSystems RX3i Specifications

General

Brand	GE
Model	PACSystems RX3i
Category	Controller
Language	English