GE PACSystems RX3i Command Line Interface Manual

GFK-2572 3-1
Modify-Level Commands
This chapter describes commands that are available for Modify-level access to the Command
Line Interface. Global commands, which are common to both Monitor- and Modify-level access,
are defined in chapter 1.
Modify Access Level Commands
 Arp
 Blinkld
 Clear arp
 Clear counters
 Clear counters profinet
 Clear log
 Clear statLED
 Default
 LoginCfg
 Logout
 Monport
 Ping
 Restart
 SessionTimeout
 Telnetd
 Time
Modify-Level Login
Logging into and out of Modify-level access is done using the login and logout commands. Both
the login name and password are case-sensitive (however, commands are not case-sensitive).
When Modify-level access is enabled, the command line prompt displays “=” following the
device name.
Login name (cannot be changed): admin
Default password: system
The password can be changed from the Modify level.
Chapter
3

GE PACSystems RX3i Specifications

General

Brand	GE
Model	PACSystems RX3i
Category	Controller
Language	English