GE PACSystems RX3i - Node

`
node
GFK-2572 Chapter 2 Monitor Level Commands 2-17
2
node
Global Command
The node command displays device ID and physical module information. This command
displays the same information as the show node command without parameters (see page 2-43).
node Command Format
node
Example
Screen Display
device-name> node
25-FEB-2011 15:00:33.0579
<<< Node Info >>>
Device Type: PROFINET Controller
Catalog Number: IC695PNC001
Serial Number: A123456
Date Code: 11-JUN-2011
Revision Information:
Primary FW: 1.00 (05D1)
Boot FW: 1.00 (01D1)
FPGA: 0.33 (46A1)
BIOS: PNC1D001 (23-JUL-2010)
PNIO Stack: 2.1.6.1
(c) 2008-2011 GE Intelligent Platforms, Inc. All rights reserved.
<<< Node ID >>>
Device Name: device-name
IP Address: 10.10.0.134
Subnet Mask: 255.255.255.0
Default Gateway: 10.10.0.1
device-name>