show port
2-48 PACSystems* RX3iPROFINET Controller Command Line Interface Manual – July 2011 GFK-2572
show port
Global Command
The command show port displays a summary of internal and external port information:
all displays detailed port information on all ports. Note that this display does not include fdb
(filtering database) information.
sfp shows information for either a specified Small Form-factor Pluggable (SFP) device or all
SFP devices, and dumps all the SFP EEPROM contents. If the device supports diagnostic
information, it is included.
status shows the link status (up or down), negotiated network speed/duplex mode, switch
management state (Disabled, Blocked, Forwarding, Learning), switch override status and switch
monitor status (monitor port and which ports are being monitored) of each external and internal
Ethernet port.
fdb shows the filtering database for one port or all ports in the switch.
<portName> shows details for the specified port name. For example, show port 1 displays
detailed information for port #1. Valid values are 1, 2, 3, or 4 for the four external ports and “int”
for the internal data port. No SFP data is returned for external RJ-45 copper ports 1 and 2, or
the internal port.
show port Command Format
show port [all | sfp [<portName>] | status | fdb]
Examples
Displaying Internal and External Port Information
device-name> show port
01-JAN-2000 05:44:17.0000
<<< Port Status >>>
Port State DataRate Mode SwitchState SwchOvrd MonitoredBy
------ ----- --------- ----------- ----------- -------- -------
1(Ext) UP 1000Mbps Full duplex FORWARDING Monitor
2(Ext) DOWN NA NA DISABLED Port 1
3(Ext) UP 1000Mbps Full duplex LEARNING None
4(Ext) UP 100Mbps Full duplex BLOCKING X Port 1
5(Int) UP 1000Mbps Full duplex LEARNING NA
<<< SFP Info >>>
Pt SFP Type Vendor Name Vendor Part No. Description
-- ------------- ---------------- ---------------- ----------------------
03 1000BASE-T FINISAR CORP. FCLF-8521-3 Copper 1Gbit Enet
04 100BASE-LX10 3COM 3CSFP82 Fiber 100Mbit Enet
SingleMode
device-name>
To Next Page
Loading...
