help
2-4 PACSystems* RX3iPROFINET Controller Command Line Interface Manual – July 2011 GFK-2572
help
Global Command
This command displays commands that are available at the current access level.
help at the command prompt displays all commands available at the current access
level/mode (both global and non-global).
? at the command prompt displays all non-global commands available at the current
access level/mode.
help global displays global commands.
help edit describes key sequences for line editing.
? or <TAB> perform automatic completion or suggest possible commands when a command
is only partially-entered. In addition, ? lists possible parameters and associated
help strings after a command has been fully-entered.
help Command Formats
help [global | edit]
?
Examples
Displaying All Commands for Monitor Access Level
device-name> help
login - Enter Higher Access Level
shConfig - Set/Show Shell settings
<<< Global Commands >>>
alias - Text substitution
cls - Clear the screen
help - Show available commands
history - Show command history
log - Display local log table
node - Display Identification, Status and Module Info
show - Show system attributes
terminate - End a command shell session
device-name>
To Next Page
Loading...
