GE PACSystems RX3i - Show Arp

show arp
2-22 PACSystems* RX3iPROFINET Controller Command Line Interface Manual – July 2011 GFK-2572
2
show arp
Global Command
This command displays the contents of the Controller’s IP-to-physical address translation table
used by Address Resolution Protocol (ARP).
Show arp Command Formats
show arp
Example
Screen Display
device-name> show arp
01-JAN-2000 00:50:49.0000
<<< ARP Cache >>>
10.10.0.250 at 00:60:6f:30:8c:12 on gei0