GE PACSystems RX3i Command Line Interface Manual

`
show sessionTimeout
GFK-2572 Chapter 2 Monitor Level Commands 2-67
2
show sessionTimeout
Global Command
The Command Line Interface disconnects after a period of inactivity. This command displays
the current session inactivity timeout value in seconds. This timeout determines how long the
Command Line Interface will remain idle before closing the current session. A timeout warning
is issued when one-half of the session timeout period has passed.
If a timeout occurs, it will be necessary to start a new session.
 For a USB connection, pressing Enter within the terminal application starts a new session at
the Monitor access level.
 For a network connection, a new telnet session must be established.
show sessionTimeout Command Format
show sessionTimeout
Example
Screen Display
device-name> show sessionTimeout
Session Inactivity Timeout: 600 seconds
device-name>
device-name>
This terminal has been idle for 300 seconds.
It will be logged out if it remains idle for another 300 seconds.
device-name>
Log out by the system

GE PACSystems RX3i Specifications

General

Brand	GE
Model	PACSystems RX3i
Category	Controller
Language	English