GE PACSystems RX3i Command Line Interface Manual

`
history
GFK-2572 Chapter 2 Monitor Level Commands 2-9
2
history
Global Command
This command displays command history with a history number for each previously-entered
command. The clear parameter clears the command history.
“!<historyNumber>” executes a command associated with the history number in the command
history.
up arrow (↑) or <ctrl>p shows previous command in the command history.
down arrow (↓) or <ctrl>n shows next command in command history. Only valid after
moving up through command history with the up arrow (↑) or <ctrl>-p.
history Command Formats
history [clear]
!<historyNumber>
[↑ | <Ctl>p]
[↓ | <Ctl>n]
Examples
Using the History Command to Display Previously Entered Commands
Screen Display
device-name> alias sh show
device-name> alias shcfg "show config"
device-name> history
1. alias sh show
2. alias shcfg "show config"
3. history
device-name>
Clearing Command History
Screen Display
device-name> history clear
History Cleared
device-name> history
1. history
device-name>

GE PACSystems RX3i Specifications

General

Brand	GE
Model	PACSystems RX3i
Category	Controller
Language	English