GE PACSystems RX3i Command Line Interface Manual

arp
3-2 PACSystems* RX3i PROFINET Controller Command Line Interface Manual – July 2011 GFK-2572
3
Example of Changing Access Level
Initial display:
device-name>
Enter the login command to enter Modify Access Level using the admin user name and
password (this is an example only; the password does not actually appear):
device-name>
device-name> login
Login:admin
Password:system
device-name=
Enter ? to view the available non-global commands in Modify level:
device-name= ?
arp - Show ARP Table
clear - clear ARP, counters, log, STAT LED.
default - Return module to factory default values.
login - Enter higher Access Level
loginCfg - Set login parameters such as password
logout - Return to Monitor Access Level
[no] monport - Specify the monitor port/ports to be monitored
ping - Send ICMP Echo requests.
restart - Restart the IO LAN module firmware
sessionTimeout - Sets/Displays session inactivity timeout
shConfig - Set/Show Shell settings
[no] telnetd - Enables/Disables telnet server.
time - Change the internal IO LAN clock.

GE PACSystems RX3i Specifications

General

Brand	GE
Model	PACSystems RX3i
Category	Controller
Language	English