GE PACSystems RX3i - 5.1 Power-up and Reset (PNC001 Module)

telnetd
GFK-2572 Chapter 3 Modify-Level Commands 3-21
3
Changing the Maximum Number of Telnet Connections
Step 1. Change the maximum connections.
Screen Display
device-name= telnetd 4
Max telnet Connections changed to 4
telnet changes will not take effect until next powerup or restart
device-name=
Step 2. Restart or power cycle the PNC. Use show telnet to display the Telnet status.
Screen Display
{Power-cycle occurs}
device-name> show telnet
01-JAN-2000 05:44:17.0000
<<< Telnet Info >>>
telnet Status: Enabled
Max telnet Connections: 4
Active telnet Connections: 1
device-name>
Disabling Telnet Connections
Step 1. Use no telnetd to disable all telnet connections.
Screen Display
device-name= no telnetd
telnet changes will not take effect until next powerup or restart
device-name=
Step 2. Restart or power cycle the PNC. Use show telnet to display the Telnet status.
Screen Display
{Power-cycle occurs}
device-name> show telnet
01-JAN-2000 05:44:17.0000
<<< Telnet Info >>>
telnet Status: Disabled
Max telnet Connections: 0
Active telnet Connections: 0
device-name>