GE PACSystems RX3i - Page 69

`
show port
GFK-2572 Chapter 2 Monitor Level Commands 2-53
2
Empty SFP Cages and Unsupported SFPs
The following example shows the display when there is an empty SFP cage (Port 3) and when
an SFP is unsupported (Port 4).
Screen Display
device-name> show port
01-JAN-2000 05:44:17.0000
<<< Port Status >>>
Port State DataRate Mode SwitchState SwchOvrd MonitoredBy
------ ----- --------- ----------- ----------- -------- ----------
1(Ext) UP 1000Mbps Full duplex FORWARDING Monitor
2(Ext) DOWN NA NA DISABLED Port 1
3(Ext) UNPLUG NA NA NA None
4(Ext) UNSUP NA NA NA None
5(Int) UP 1000Mbps Full duplex LEARNING NA
<<< SFP Info >>>
Pt SFP Type Vendor Name Vendor Part No. Description
-- ------------- ---------------- ---------------- ----------------------------
03 UNPLUGGED NA NA NA
04 UNSUPPORTED NA NA NA