GE PACSystems RX3i - Page 81

`
show profinet
GFK-2572 Chapter 2 Monitor Level Commands 2-65
2
Field
Description
PlugInd
Number of Plug alarms received from the device. Includes: Plug
and Plug Wrong Submodule alarm types.
ManufInd
Number of Manufacturing Specific alarms received from the
device.
OtherInd
Number of alarms received that do not fall in one of the other
specified alarm categories.
AlmAck+
Number of positive Alarm Acknowledgements sent by the
PROFINET Controller.
AlmAck-
Number of negative Alarm Acknowledgements sent by the
PROFINET Controller.
AlmCnf+
Number of positive Alarm confirmations received from the device.
AlmCnf-
Number of negative Alarm confirmations received from the
device.
LatchReq
Number of times the Controller attempted to latch IOCR data
to/from the network.
LatchCnt
Number of times the Controller successfully latched IOCR data
to/from the network.
InptScns
Number of times a submodule was scanned for input.
DataLtch
Number of times a submodule successfully latched its input data
from the network.
BadInScn
Number of times the submodule had a failure scanning inputs.
OutScans
Number of times a submodule was scanned for output.
OutCltRd
Number of times the Controller successfully read the submodule
output values from PLC.
BdOutScn
Number of times the submodule had a failure scanning outputs.