GE RSDetection RS-S131-200-ER0000 User Manual

RSDetection
User’s Manual
Copyright © 2016 General Electric Company. All Rights Reserved S131-200-UM Rev A
Page 41
g
5.3.3.1 Common Configuration Parameters
Every configuration has a number of general properties that are read-only but appear
under the category of “General.” Since they are common, they will only be described below
and not repeated for each type of configuration.
Table 8 General Configuration Parameters
Parameter
Variable
Property Description
Default Setting
Optional Settings
General
Date
Modified
Date the parameter was
modified.
Cannot be
changed manually
Cannot be
changed manually
Name
Name of the parameter.
Cannot be
changed manually
Cannot be
changed manually
Type
The type of the parameter:
Event
ScalarMeasurement
CompositeMeasurement
System
SerialPort
Cannot be
changed manually
Cannot be
changed manually
5.3.3.2 Scalar Measurement Configuration Parameters
Every measurement has a number of properties that govern its behavior. These are
described in Table 9.
Table 9 Scalar Measurement Configuration Parameters
Category
Parameter
Property Description
Choices
Measurement
LogEnable
If true, measurement will be
logged whenever it is updated.
True
False
LoggingIntervalSpan
The database logging interval.
Manually type
NotifyEnable
If true, a notification will be sent
whenever an update occurs.
True
False
UpdateIntervalSpan
The interval between
measurement updates.
Manually type
Units
Measurement units for display.
Measurement
dependent
DoseRateTimeConsta
nt*
The dose rate time constant.
Manually type
RoentgenToSievert*
Conversion factor to convert
Roentgen to Sievert.
Manually type
* Applies to the Dose Rate scalar measurement only

GE RSDetection RS-S131-200-ER0000 Specifications

General

Brand	GE
Model	RSDetection RS-S131-200-ER0000
Category	Measuring Instruments
Language	English