RSDetection
User’s Manual
Copyright © 2016 General Electric Company. All Rights Reserved S131-200-UM Rev A
Page vii
THE SENSOR HOUSING CONTAINS A PRESSURIZED IONIZATION CHAMBER WITH HIGH
INTERNAL PRESSURE AND HIGH VOLTAGE (~400 VDC) ON ITS SURFACE WHEN POWER
IS APPLIED. REMOVAL OF CHAMBER FROM ITS PROTECTIVE HOUSING OR
MISHANDLING COULD CAUSE SERIOUS INJURY.
THIS ENCLOSURE MAY CONTAIN ONE LITHIUM-ION BATTERY. THIS ENCLOSURE
CONTAINS A PRESSURE VESSEL MEETING THE REQUIREMENTS OF 97/23/EC.
WHEN SERVICING THE UNIT BY QUALIFIED, APPROVED PERSONNEL, ENSURE THAT
POWER IS OFF BEFORE OPENING THE CASE. FAILURE TO DO SO WILL RESULT IN -400V
APPLIED TO THE OUTSIDE OF THE CHAMBER AND MAY RESULT IN SHOCK.
MISHANDLING MAY BURST THE CHAMBER AND RESULT IN INJURY OR DEATH.
THE RSDETECTION MAY ONLY BE OPENED BY TECHNICIANS TRAINED AND
AUTHORIZED BY REUTER-STOKES.
TO PREVENT DAMAGE TO THE INTERNAL BATTERY AND INTERNAL CIRCUITS, DO
NOT CONNECT A SOLAR PANEL AND BATTERY CHARGER SIMULTANEOUSLY.
THE (OPTIONAL) INTERNAL BATTERY USED IN THIS INSTRUMENT IS A LI-ION
BATTERY AND SHALL ONLY BE REPLACED WITH AN INSPIRED ENERGY NH2057GE29
BATTERY. THIS IS AVAILABLE EITHER FROM GE REUTER-STOKES OR DIRECTLY FROM
INSPIRED ENERGY. USE OF ANY OTHER BATTERY MAY CAUSE DAMAGE TO THE
CHARGING UNIT OR THE INSTRUMENT.
THE CUSTOMER MUST PROVIDE EXTERNAL DC VOLTAGE FROM A SOURCE THAT IS
CERTIFIED FOR OUTDOOR USE.
THE SENSOR IS CERTIFIED TO IP66.
THE SENSOR HAS OBTAINED US AND CANADIAN ETL CERTIFICATION.
THE SENSOR IS CERTIFIED TO CE.
To Next Page
Loading...
