August 2008
1-10 Installation & Operation
The Screen (cont.) The system tray displays icons that indicate meter operations not
otherwise shown. Table 1-3 below lists the icons and their meanings.
The bottom of the screen displays the three function key options:
[F1], [F2] and [F3]. These keys have different functions, depending on
the task you are performing.
Table 1-3: Icons in the System Tray
Icon Function Meaning
IR Transfer IR data transfer in progress.
Alert Indicates the meter encountered an
error in operation.
Log Indicates a log is pending (no
marks) or running (marks).
Heating/
cooling
Indicates heating or cooling energy
mode.
Stopwatch Calibration Gate Operation: Watch
is stopped when the gate is closed,
or runs when it is open.
Snapshot
(To file)
Indicates that the Snapshot function
has been activated, so users can
take screen captures.
(To Printer)
To Next Page
Loading...
