August 2008
3-2 Operation
The Format Option The Number Format option, allows you to specify the type of
notation and the number of decimal places for the selected parameter
(see Figure 3-2 below).
Note: For a line or bar graph display, the Limits option appears
instead of the Format option.
Figure 3-2: The Number Format Window
1. Use the arrow keys to select the Format option and press [ENTER]
to open the drop-down list of three format choices (Default, Fixed
Decimal, and Scientific).
2. Scroll to the desired number format and press
[ENTER] to confirm
your choice.
3. Use the arrow keys to select the Decimal Places option and press
[ENTER] to open the drop-down list of choices (0, 1, 2, 3, and 4).
4. Scroll to the desired number of decimal places and press [ENTER] to
confirm your choice.
5. Press [F3] (OK) to confirm your selections and return to Operate
Mode. Otherwise, you can press [F2] (Cancel) or the [ESC] key to
exit the Format Menu without confirming your selections.
Programming
Number Format
Cancel
OK
Format
Fixed Decimal
Decimal Places
2
To Next Page
Loading...
