August 2008
3-8 Operation
Specifying the Number of
Displayed Parameters
To change the number of open display windows, use the [T]or [S]
arrow keys to move to the desired number of views (1 View, 2 View, 3
View, or 4 View) and press [ENTER]. The screen then displays the
specified number of windows. For example, Figure 3-7 below shows
a screen configured to display one window.
Figure 3-7: “1 View” Display
Note: The PT878 display windows are numbered with #1 at the
upper left, #2 at the upper right, #3 at the bottom left, and #4
at the bottom right. The number of views selected will use the
appropriate number of these windows in numerical order. For
example, if you select a “2 View” display, windows #1 and #2
will be displayed.
2000/11/30 09:53 AM
Velocity, ft/s
E0: No Errors
ABC.SIT
12.2
-12.2
10 Seconds
-0.6014
To Next Page
Loading...
