August 2008
4-6 Managing Site Files
The Save Option You can save the current site in one of two ways:
• From the Site Menu (see Figure 4-1 on page 4-1), scroll to the Save
Now option and press [ENTER]. Or,
• From the Site Manager (see Figure 4-3 on page 4-3), press [MENU]
to open the File menu. Then, scroll to the Save option, and press
[ENTER].
In either case, a window similar to Figure 4-7 below opens.
Figure 4-7: The Save Site Window
When the above window opens, respond as follows:
• Press [F2] (No) to cancel saving the current site, or
• Press [F3] (Yes) to save the current site
If you pressed [F3] above, the current site is saved, and the PT878
remains in the current window (Operate Mode or Site Manager).
No Yes
Save the current site
(DEFAULT.SIT)?
Save Site
To Next Page
Loading...
