GE Transport PT878 - The Log Menu

August 2008
5-10 Data Logging
The Log Menu The Log menu is used to manage your active logs. To access the Log
menu, proceed as follows:
1. At the Log Manager window, press [MENU] and then [ENTER].
2. Press the [X] key to highlight the Log menu. Then, press [ENTER]
and a window similar to Figure 5-9 below opens.
Figure 5-9: Log Menu in the Log Manager
Use the [T] and [S] arrow keys to select the desired option from the
above menu and proceed to the appropriate section for instructions.
The Pause Option Use the Pause option to temporarily stop a log that is currently
pending or running:
1. In the Log Manager window (see Figure 5-2 on page 5-2), use the
[T] and [S] arrow keys to highlight the log you wish to stop.
2. At the Log Manager window, press [MENU] and then [ENTER].
3. Press the [X] key to highlight the Log menu and press [ENTER].
4. In the Log menu, scroll to the Pause option and press [ENTER].
The PT878 returns to the Log Manager window, which now shows
the highlighted log as Paused in the status line.
Log Manager
Info: AAA.LOG
03/01/01 13:23:21
1216 bytes
109568 bytes free
Refresh Exit
AAA
BBB
CCC
State: Finished
S:03/01/01 13:13:41
E:03/01/01 13:23:41
Interval: 10 Seconds
Records:51
Pause
End
Start All Logs
Pause All Logs
End All Logs
View All Sites
Start
File Log View Sort