Operation 3-3
August 2008
The View Option The View option, allows you to specify the type of display for the
selected parameter.
1. Use the arrow keys to select the View option.
2. Press
[ENTER] to open the drop-down list of three display types
(Numeric, Line Graph, and Bar Graph).
3. Scroll to the desired display type and press [ENTER] to confirm
your choice.
The display immediately changes to reflect the choice made above.
For example, if you chose a Line Graph display, the screen appears
similar to Figure 3-3 below.
Figure 3-3: Display After Format Change
2000/11/30 09:53 AM
Velocity, ft/s
32
Delta-T, ns
0.10
0.0
Volume, l/s
E0: No Errors
ABC.SIT
Signal, dB
12.2
12.2
-
10 Seconds
-0.6014
To Next Page
Loading...
