Operation 3-7
August 2008
Customizing the Display
Screen
The Site Menu enables you to customize your display screen. To enter
the Site Menu:
Note: As an aid in following the programming instructions in this
manual, refer to Appendix A, Menu Maps.
1. Press the
[MENU] key at the lower right of the PT878 keypad. The
Menu Bar replaces the Status Bar at the top of the screen.
2. With the Site Menu highlighted, press [ENTER] and a screen similar
to Figure 3-6 below appears.
Figure 3-6: The Site Menu
Proceed to the appropriate section to specify the number of displayed
parameters or to customize the softkeys.
Meter Logging Service
Velocity, ft/s
0.00
32
Delta-T, ns
0.10
0.0
Volume, l/s
E0: No Errors
Signal, dB
Save Now
1 View
2 View
3 View
4 View
Drive Manager
FKeys
4
Manager
Site Program
About
To Next Page
Loading...
