Operation 3-21
August 2008
The Language Option
(cont.)
5. Changing the language requires restarting the PT878. When a
window like the one in Figure 3-16 below appears, press [F2] to
cancel the change or [F3] to confirm the change.
Figure 3-16: Change Language Confirmation Window
The meter will now restart in Operate Mode in the new language.
The Communications
Option
To configure the PT878 wireless infrared interface, use the
Communication option:
1. Access the Meter Menu as described on page 3-13.
2. Scroll to the Communication option and press
[ENTER]. The
Communications window opens (see Figure 3-17 below).
Figure 3-17: The Communications Window
Change Language
Cancel OK
Choose CANCEL to exit or OK to
proceed.
Changing the meter’s language
requires a restart.
Communications
Node ID
2
Comm Interface IrDA
IR 232
Baud Rate
9600
bps
Parity
None
Stop Bits
Data Bits
1
2
78
Cancel OK
To Next Page
Loading...
