GE Transport PT878 - The Open Option

Managing Site Files 4-5
August 2008
The Open Option To recall a site that has been previously created and saved:
1. Highlight the desired site in the Site Manager window (see Figure
4-2 on page 4-2).
2. Press
[MENU] to open the File menu.
3. Scroll to the Open option, and press [ENTER]. A window similar to
Figure 4-6 below opens.
IMPORTANT: When you open a previous site, all of the site data
currently in memory will be erased.
Figure 4-6: The Open Site Confirmation Window
4. Select one of the following options:
• Press [F2] (No) to cancel opening the selected site
• Press [F3] (Yes) to open the selected site
5. If you decided to open the selected site above, you must decide if
you want to save any changes to the current site:
• Press [F2] (No) to erase the changes
• Press [F3] (Yes) to confirm and save the changes
If you pressed [F3] above, the PT878 returns to Operate Mode, and the
selected site is shown in the upper left corner of the display.
1 View
Programming
Site Manager
No
Yes
Info:DEFAULT
GLOBAL
File
DEFAULT
Open Confirmation
Res
Re
Open File DEFAULT
Are You Sure?