GE Transport PT878 - The Site Menu

Managing Site Files 4-1
August 2008
The Site Menu So that you don’t need to reenter all of your initial setup data (see
Chapter 1) each time you use the meter, the PT878 can store this site
data in files. Then, the Site Menu enables you to create and manage
these site files.
To access the Site Menu, proceed as follows:
1. Press the
[MENU] key at the lower right of the PT878 keypad. The
Menu Bar replaces the Status Bar at the top of the screen.
2. With the Site Menu highlighted, press [ENTER] and a screen similar
to Figure 4-1 below appears.
Note: As an aid in following the programming instructions in this
manual, refer to Appendix A, Menu Maps.
Figure 4-1: The Site Menu
Meter Logging Service
Velocity, ft/s
0.00
32
Delta-T, ns
0.10
0.0
Volume, l/s
E0: No Errors
Signal, dB
Save Now
1 View
2 View
3 View
4 View
Drive Manager
FKeys
4
Site Manager
Site Program
About