Data Logging 5-1
August 2008
The Logging Menu A powerful feature of the PT878 is data logging. The logged data is
stored internally in battery-backed-up memory, and a fixed amount of
memory is assigned to data logging.
To access the Logging Menu, proceed as follows:
1. Press the
[MENU] key at the lower right of the PT878 keypad. The
Menu Bar replaces the Status Bar at the top of the screen.
2. Scroll to the Logging Menu and press [ENTER]. A screen similar to
Figure 5-1 below appears.
Note: As an aid in following the programming instructions in this
manual, refer to Appendix A, Menu Maps.
Figure 5-1: The Logging Menu
Note: For any menu options not discussed in this abridged manual,
see your full User’s Manual (910-219).
Velocity, ft/s
Signal, dB
0.00
32
Delta-T, ns
0.10
0.0
Volume, l/s
E0: No Errors
Site Program Meter Logging Service
Units
Manager
New Log
Test
To Next Page
Loading...
