GE Transport PT878 - The Log Manager Window; The Log Manager Menu

August 2008
5-2 Data Logging
The Log Manager
Window
The Log Manager is the tool that is used to perform a variety of
operations on logs and log files. To access the Log Manager, proceed
as follows:
1. Access the Log Menu, as described on the previous page.
2. With the Log Menu highlighted, scroll to the Manager option and
press
[ENTER]. A screen similar to Figure 5-2 below appears.
Figure 5-2: The Log Manager Window
The box on the left site of the Log Manager window lists all of the
logs currently in the PT878 memory. You can use the [T] and [S]
arrow keys to scroll through this list. The right section of the window
shows information for the highlighted log.
IMPORTANT: Logs are associated with the site in use at the time the
log is created. By default, the Log Manager lists only
the logs for the current site.
The Log Manager Menu To open the Log Manager menu, proceed as follows:
1. At the Log Manager window, press [MENU] and then [ENTER].
2. Use the arrow keys to scroll through the menus and menu options
until the desired menu option is highlighted.
3. Press
[ENTER] to open the menu.
Proceed to the appropriate section for instructions on specific menus.
Log Manager
Info: AAA.LOG
03/01/01 13:23:21
1216 bytes
109568 bytes free
Refresh Exit
AAA
BBB
CCC
State: Finished
File Log View Sort
S:03/01/01 13:13:41
E:03/01/01 13:23:41
Interval: 10 Seconds
Records:51