GE Transport PT878 - The Limits Option

August 2008
3-4 Operation
The Limits Option For a graphical display, the Limits option enables you to program:
• the minimum or maximum values displayed
• the time interval
• the display of the average value
Note: For a numeric display, the Format option appears instead of
the Limits option.
1. Use the arrow keys to select the Limits option and press [ENTER].
2. At the Change drop-down menu option, press [ENTER] again and a
window similar to Figure 3-4 below appears.
Figure 3-4: The Line Graph Parameters Window
3. Scroll to the Minimum text box and press [ENTER] to open the box.
4. Use the numeric keys to enter the minimum value to be displayed
on the graph. Press [ENTER] to confirm the value.
5. Scroll to the Maximum text box and press [ENTER] to open the box.
6. Use the numeric keys to enter the maximum value to be displayed
on the graph. Press [ENTER] to confirm the value.
Programming
Set Line Graph Parameters
Cancel
OK
Velocity
Use Lines
Plot Average Value
10
Seconds
-12.2
Minimum
Maximum
12.2
Show Minimum and Maximum