Measurement and Analysis
286 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
• 2D image with Peak systolic strain parametric data
• Segmental curves with peak marker
• Curved M-Mode image with strain parametric data
• ECG trace and "QuickTip" help
Figure 7-18: Quad screen for the APLAX view
AFI on A4-Ch and A2-Ch views
The procedure for AFI on Apical 4-chamber and 2-chamber
views is similar to the one used in the APLAX view:
• Open the apical view from the clipboard.
• Select the corresponding view in the View selection menu
(Figure 7-11).
• Define a ROI ("Defining a ROI" on page 276).
• Tracking Validation ("Tracking Validation" on page 283).
Note: the AVC timing setting defined in the APLAX view is used
by the system when running AFI on the other apical views.
To Next Page
Loading...
