Getting started
62 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Figure 2-7: Operator Login Window
Switching off the unit
When the Vivid S5/Vivid S6 is switched off, the system
performs an automatic shutdown sequence. The unit can be
switched off into one of three states.
• Full shutdown: the entire system is shut down. Full
shutdown is recommended if the system is not intended to
be used for a whole day or longer. It is recommended to
perform a full shutdown at least once a week. This will
prevent extreme memory fragmentation, which might cause
some computer slowdown.
• Standby mode: most of the system is powered down, but
a certain portion of the unit remains energized. The standby
mode allows a shorter reboot time when the system is used
on a daily basis or moved from one place to another.
• Battery mode: When AC power is interrupted, the screen
and keyboard are powered down. The rest of the system is
still powered ON. The fans are heard. When AC power is
resumed, the system will turn ON in less than 10 seconds
(see "Battery Power Mode" on page 63).
1. Operator: Select the relevant Operator name
2. Password: Enter the Operator’s password
3. Emergency: Data stored for the duration of the current examination only
4. Log on: Select type of Log on (for example, Standard logon)
5. Cancel: Cancel Log on
To Next Page
Loading...
