Basic scanning operations
Vivid S5/Vivid S6 User Manual 123
R2424458-100 Rev. 2
To connect the internal ECG
1. Connect the ECG trunk cable into the rectangular-shaped
socket marked ECG on the patient I/O panel. The patient
I/O panel is located in the front left of the ultrasound unit
(see Figure 3-7).
Table 3-1: ECG Electrode Placement table
AHA (USA) IEC (Europe, Asia, ROW)
Black (LA) p/n 412680-104 Yellow (L) p/n 412680-106
White (RA) p/n 412680-102 Red (R) p/n 412680-108
Green (RL) p/n 412680-103 Black (N) p/n 412680-107
LL Unassigned F Unassigned
V Unassigned C Unassigned
Trunk cable p/n 412931-001 Trunk cable p/n 412931-002
To Next Page
Loading...
