Basic scanning operations
124 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
2. Hook up the electrode cables to the electrodes, following
the appropriate convention (see Table 3-1).
Connecting External ECG
A special External cable kit that can be ordered as
p/n H45021DE. The kit contains a 20-foot coax cable with
some additional connectors and adapters to allow interfacing
with various external ECG monitors. The type of adapter
should match the connector recommended by the ECG monitor
vendor
.
Figure 3-7: The Patient ECG Connector Port
Connecting ECG electrodes for Pediatrics
It is possible to use pre-attached miniature disposable ECG
electrodes for pediatrics and neonatal use.
A special adapter is available allowing the connection of
pre-wired electrodes using a DIN 1.55 type connector into the
"MultiLink" ™ trunk ECG cable (see Figure 3-8).
1. ECG Connector port
2. CW pencil probe port
To Next Page
Loading...
