Measurement and Analysis
342 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Figure 7-49: The Normal value window
4. In the Normal value window:
• Select the Normal value type (Range, Above or Below).
• Type in the Normal value.
• Optionally enter a reference for the Normal value.
5. Select OK.
The Normal value is displayed in the Measurement menu
sheet.
To display Normal values and references in the Report, the
Report template must be configured to show Normal values
(see page 340). Measurements outside the Normal value are
highlighted in the Report.
To Next Page
Loading...
