GE Vivid S6 - Page 467

Archiving
Vivid S5/Vivid S6 User Manual 449
R2424458-100 Rev. 2
Figure 9-33: DICOM storage properties window
5. Check the option DICOM SR.
6. Select OK.
7. Press
CONFIG.
Adjusting the Search criteria
When selecting a DICOM Worklist dataflow or Query/Retrieve,
search criteria can be set for the system to use when searching
the database.
1. Press
CONFIG and log on as administrator.
2. Select the Connectivity category and Dataflow subgroup.
The Dataflow sheet is displayed (see Figure 9-34).
3. Select a DICOM Worklist dataflow or the Query/Retrieve
dataflow.
4. Select the Worklist or Query/Retrieve device in the
Selected devices pane and press Properties.
The Properties window for the selected DICOM device is
displayed.
5. Press Search criteria.
The Search criteria window is displayed.
6. Select a Search criteria from the Select tag pull-down
menu.