GE Vivid S6 - Page 636

Presets and System setup
618 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Dataflows available
A set of pre-defined dataflows is available on the unit as listed
in the table below. Input/output devices cannot be
added/removed to/from the pre-defined dataflows. However the
settings for the devices can be adjusted (see page 621).
Dataflow Description
No Archive Enables to perform an examination
without storing the data to the archive.
LocalArchive-Int.HD Local archive internal hard drive
The local database is used for patient
archiving. Images are stored to
internal hard drive. The stored image
files will consist of raw data only,
together with a single-frame DICOM
preview image (no DICOM multi-frame
is stored).
Local Archive - Int
HD/DICOM Server
The local archive is used for patient
archiving. Images are stored to the
internal hard drive and to a DICOM
server.
Some of the measurements are stored
if DICOM SR is turned on (see
page 447)
RemoteArch-RemoteHD Remote archive remote hard drive
A remote database (either on
EchoPAC workstation or a server) is
used for patient archiving. Images are
stored to a network image volume
(either internal HD on EchoPAC
workstation or a server).
Remote Archive - Remote
HD/DICOM Server
A remote database is used for patient
archiving. Images are stored to a
network image volume and to a
DICOM server.
Some of the measurements are stored
if DICOM SR is turned on (see
page 447)