38
8. The photo settings you stored the last time are
invoked.
The factory default settings are Program AE
and other parameters.
Custom Settings only keep the photo
shooting mode and parameters you set the
last time you used the camera in this mode.
Landscape
While operating in this mode, the camera will Vivid
reproduction of green and blue, adjust your
landscapes photos for the best possible results.
Follow these steps:
1. Use the power switch to turn the camera on.
2. Switch the Mode Dial to Landscape Mode
.
3. Compose your picture in the LCD screen and
press the Shutter button halfway down to focus
on the subject.
4. The LCD screen will show a green focus frame
when the subject is in focus.
5. Fully press the shutter button down to take
pictures.
To Next Page
Loading...
