GE X450 - Connecting to a Pictbridge Compatible Printer; Setting the USB Mode

85
Connecting to a PictBridge Compatible Printer
PictBridge technology allows
printing of the photos saved in the
memory card by the printer.
TondoutifaprinterisPictBridge
compatible, simply look for the
PictBridge logo on the packaging or check the
owner'smanualforspecications.Withthe
PictBridge function on your camera, you can
print the captured photos directly to a PictBridge
compatible printer using the supplied USB cable,
without the need for a PC.
Setting the USB Mode
The camera’s USB port can be set to connect with
either a PC or a Printer, the following steps will
ensurethatthecameraiscorrectlyconguredto
connect with a Printer.
1. Press the
func
menu
button, press the left /right arrow
button to select and press the button
to enter the menu.
2. Press up/down arrow button to select
and
press the button or right arrow button to
enter the menu.
3. Press the up/down arrow button to select
「USB」and press the button or right
arrow button to enter the menu.
4. Press the up/down arrow buttons to select
「Printer」and press the button to
conrm.
TV System
NTSC
Eye-Fi
Off
USB
Printer
TV System
NT
SC
Ey
e-F
i
Of
f
P
r
i
n
te
r
Printer
PC
After the camera is reset, it will switch to PC
mode automatically from USB mode.
See “PictBridge“ section on page 87.