230
4. Unable to receive radio broadcast (poor reception)
(1) Check if the radio auto-research function works
Perform the radio auto-research function to see if it works
Normal: Check and replace radio assembly
Abnormal: Check the antenna for noise
(2) Check the antenna for noise
1 Turn on radio to AM with the ignition switch ACC.
2 Touch the antenna of the seated antenna assembly with the tip of the screwdriver. Check the speaker for
noise.
Standard: There is noise
Normal: Check and replace radio assembly
Abnormal: Check antenna assembly
(3) Check antenna assembly
1 Remove the antenna plug from the antenna assembly
2 Check for noise
 Connect the radio assembly connector and turn the ignition switch to ACC.
 Turn on the radio to AM
 Insert a flat pan screwdriver or metal object similar to thin wire into the hole in the antenna coaxial
cable. Check the speaker for noise.
Standard: There is noise.
Normal: Check and replace radio assembly
Abnormal: Check and replace antenna coaxial cable sub-assembly
5. Cassette tape can not be inserted or played.
(1) Check for foreign object
 Check the radio assembly and cassette recorder for foreign object or defect.
Abnormal: Clean foreign object
Normal: Check cassette tape
(2) Check cassette tape
 Check if the cassette tape is used to record music or sound.
Replace the tape with another tape and re-check if it is faulty.
(3) Replace it with another tape and re-check
 Replace the faulty tape with working tape to see if the same fault will re-occur.
Standard: The function is normal
Normal: The tape is faulty
Abnormal: Check if the radio auto-research function works
To Next Page
Loading...
Need help?
General
