238
Section 4 Audio and Video System Replacement
I. Notice on operation
Please explain to the customer that the AM/FM broadcast channel information will be cleared when remov-
ing the battery negative terminal cable. Record the channel information before removing the negative termi-
nal cable if necessary. Reset after connecting the negative terminal cable.
 All cassette tapes and CDs must be taken out before radio removal and installation.
 If the cassette tapes and CDs can not be taken out due to radio fault. Do not take them out by force.
Drive the vehicle to Service Station.
 Make sure the grounding bolts are tightened before antenna removal and installation.
 There will be noise when receiving electric wave if the grounding bolts are not tightened.
 Don't touch the speaker cone.
Intermediate
Multiple CD main unit
Radio assembly
Instrument Panel
Multiple DVD main unit
To Next Page
Loading...
Need help?
General
