Geely CK MR479QA 2007 User Manual

309
5. Remove evaporator.
6. The installation is in the reverse order of the removal.
The Evaporator Installation Guide
1. Pack certain SW-100 compressor oil into the refrigerant circuit when installing a new evaporator.
Refill: (approximate)
15ml {15 cc, }
Check Evaporator
1. Remove evaporator.
2. Remove the evaporator core from the evaporator.
3. Check for crack, damage or oil leakage.
• Replace the evaporator core if any of the above-mentioned fault occurs.
4. Check the fin for bending.
• Flat it with a flat head screwdriver if it is bent.
Check Heater
1. Remove the heater.
2. Remove heating core from the heater.
3. Check for crack, damage or refrigerant leakage.
• Replace the heating core if any of the above-mentioned faults occurs.
4. Check the fin for bending
• Flat it with a flat head screwdriver if it is bent.
5. Check heater inlet hose and outlet hose for bend or damange.
• Repair the hose if necessary.

Geely CK MR479QA 2007 Specifications

General

Brand	Geely
Model	CK MR479QA 2007
Category	Automobile
Language	English