Geely CK MR479QA 2007 - Page 365

358
Door Adjustment
1. Measure clearance between the front door or the rear door and the vehicle body.
2. Loose the front door or the rear door hinges assembly bolt or door lock striker assembly screw
and reinstall it to the door if the measured result is not as specified in the technical standard.
Clearance
a: 5mm
b: 5mm
c: 4.3mm
d: 4.3mm
e: 3.8mm
f: 4.6mm
3. Tighten the bolt or the screw.