51
1. Detach tail exhaust pipe assembly
Remove 2 bolts and the tail exhaust pipe assembly.
2. Remove intermediate exhaust pipe assembly
Replace exhaust system
Detach 2 bolts and intermediate exhaust pipe assembly.
3. Detach front exhaust pipe assembly
Remove 2 bolts and front exhaust pipe assembly.
4. Install front exhaust pipe assembly
Using vernier calipers, measure the free length of the spring.
Free length: 42mm
Using the new gasket, install the front exhaust pipe to the exhaust manifold.
Notice:
z Do not use removed gasket any more.
5. Install front exhaust pipe assembly.
Torque: 43N. m
6. Install intermediate exhaust pipe assembly
Using the new gasket, install the intermediate exhaust pipe to the front exhaust pipe.
Torque: 44N. m
7. Install tail exhaust pipe assembly
Using the new gasket, install the tail exhaust pipe to the intermediate
exhaust pipe. See
(Figure 117).
Torque: 43N. m
8. Check exhaust for leakage
Figure 117
Tail Pipe side
Washer
To Next Page
Loading...
