Information about this manual
The
VDI100 product is an inverter designed to control a three-phase induction motor and permanent magnet.
Please read this manual carefully to ensure correct operation, safety and to become familiar with the inverter
functions.
The
VDI100 inverter is an electrical / electronic product and must be installed and handled by qualied service
personnel.
Improper handling may result in incorrect operation, shorter life cycle, or failure of this product as well as the
motor.
All
VDI100 documentation is subject to change without notice. Be sure to obtain the latest editions for use or
visit our website at http://www.gefran.com/en/product_categories/93-motion-control
Available Documentation:
1.
VDI100 Start-up and Installation Manual
2.
VDI100 Instruction Manual
Ensure you have sound knowledge of the device and familiarize yourself with all safety information and precau-
tions before proceeding to operate the inverter.
Software version
This manual is updated according the software version V 1.04
The identication number of the software version is indicated on the identication plate of the drive or can be
checked with the par. 13.01.
General information
Note ! In industry, the terms “Inverter”, “Regulator” and “Drive” are sometimes interchanged. In this document, the term “Drive” will be
used.
Before using the product, read the safety instruction section carefully.
Keep the manual in a safe place and available to engineering and installation personnel during the product
functioning period.
Gefran S.p.A has the right to modify products, data and dimensions without notice. The data can only be used
for the product description and they can not be understood as legally stated properties.
Thank you for choosing this Gefran product.
We will be glad to receive any possible information which could help us improving this manual. The e-mail
address is the following: techdoc@gefran.com.
All rights reserved
2 VDI100 • Instruction manual
To Next Page
Loading...
Need help?
General